Exports of primary steel fell by 10.7 per cent in January 2019 and 14 per cent in the first ten months of the current fiscal. What is worrying is that the declining trend in export of the key metals may continue, if EEPC projections are to be believed.Exports of ferrous and non-ferrous metals witnessed a sharp drop in recent months for more reasons than one . Exports of primary steel fell by 10.7 per cent in January 2019 and 14 per cent in the first ten months Rubber Products Manufacturers of the current fiscal. Exports of copper and copper products dropped by 76.6 per cent in January 2019 and 69.6 per cent in first the ten months.

Likewise, outward shipments of zinc and products declined by 17.6 per cent in January 2019 and 29.7 per cent in the first ten months.Even the despatches  of tin and products fell by 54.8 per cent in January 2019 and 17.4 per cent in the cumulative months of the current fiscal, going by EEPC figures. And EEPC India attributed this sharp fall to protectionist policies in the EU for import of steel products from India and the shut-down of the Thoothu-kudi plant of Sterlite Copper, among others.In this backdrop, EEPC India is organising its flagship International Engin-eering Sourcing Show (IESS) from March 14 and 16 in Chennai, where over 300 companies from India and abroad would be participating with Malaysia being the partner country.   EEPC India chairman Ravi Sehgal said that the cumulative impact of the fall in these four product lines is 3.542 billion for the first ten months (without any growth).

Had this figure been added to the  65 billion for the April-January period of the  current fiscal, India's exports growth would have been shot up to over 11.2 per cent than the current growth rate of over 5.5 per cent, he said.For these metals, there was a fall in the exports by 10.73 per cent (i.e. 817.82 million) in January 2019 vis-a-vis January 2018. Cumulatively, the decline was 13.93 per cent (i.e., around 8022.3 million) in first 10 months (April-January 2019) vis-à-vis same period last year.  What is worrying is that the declining trend in export of the key metals may continue, if EEPC projections are to be believed. Domestic refined copper production has fallen significantly during the first half of 2018-19 mainly due to the shutdown of the 400 KT, Toothukudi smelter of Sterlite which accounted for 40 per cent of the country’s smelting capacity.

from toothpaste to aspirin and to a high-end handbag, counterfeit products are everywhere.NeuroTags provides solutions for brand protection and to prevent counterfeits along with a platform to showcase the products. These points can then be used for getting discounts on further purchases. There are tracking and analytics of consumer behaviour data along with a customised track and trace solution. The problem arises when the companies are not being able to track down this market and collect their end consumer data and are unable to keep an eye on the distribution network. NeuroTags is the one-stop solution for counterfeits and fake.

Once a product is purchased user has access to the protected tag, which is protected by a scratch layer or is kept inside the product seal.NeuroTags is the one-stop Grommet solution for counterfeits and fake. The tags are connected and protected by algorithms on the server in such a way that, if anyone tries to replicate the tags, it gets caught and the copied product gets invalidated.The steady rise in the growth of counterfeit products has created a negative impact on the world market. Lastly, there is an automation of aspects of business intelligence. Apart from having tremendous business potential, India stands as a major market for counterfeit products. It can save customers from buying the fake product by scanning the tag placed on the product which also gives them referral and loyalty points. There is also a paperless warranty and customer support. NeuroTags provides mathematically coupled tags, namely open and protected.(Source). NeuroTags also offer a loyalty and referral programs for brand’s customers and middlemen.

The open tags are visible on the product and can be scanned by anyone to get the information of the product and an indication of authenticity with a certain probability.NeuroTags provides mathematically coupled tags, namely open and protected.THE ASIAN AGE. Also, a user can avail warranty, loyalty and referral points after scanning this tag. After scanning the protected tag using a smartphone, the user gets the authentic information with certainty. Counterfeiting is spread across all the sectors/industries like pharma, retail, FMCG, etc

JLR India completed 2017-18 with a total sales of 4,609 units against 2,514 units in the previous fiscal. The company's new products such as the fifth-generation all-new Land Rover Discovery and the New Range Rover Velar have been received very well in the market.auto rubber factory Tata Motors-owned Jaguar Land Rover on Tuesday said it plans to bring 10 new products in India in 2018-19, riding high on 83 per cent jump in sales in the last fiscal.JLR India completed 2017-18 with a total sales of 4,609 units against 2,514 units in the previous fiscal.

"Our sales for 2017-18 were driven almost equally by the Jaguar and Land Rover brands," Jaguar Land Rover India Ltd (JLRIL) President & Managing Director Rohit Suri told PTI.The company's new products such as the fifth-generation all-new Land Rover Discovery and the New Range Rover Velar have been received very well in the market.Besides, other models like Jaguar XE, XF and F-PACE and Land Rover Discovery Sport and Range Rover Evoque have also done well during the year, he added.Commenting on the plans for the new fiscal, Suri said, "We have 10 product actions lined up for 2018-19.

We are not looking to enter completely new segments."The new products could be facelifts or model year changes, he said without disclosing details. When asked about sales target for the new fiscal, he said JLR India was looking at continuing with the momentum and clocking double-digit growth.The new products lined up for introduction during the year will also help the company maintain sales momentum, he said; however, adding it would be difficult to achieve very high double-digit growth due to increase in prices following hike in customs duty in the Budget.

Thankfully, if something can be hacked, then it can also be un-hacked. If there’s a slight irregularity, then the printer that printed it has been hacked or tampered with. If there’s a mismatch between the audio recordings, then defective products could be prevented from reaching out to the consumers. The first method involves recording the audio of a 3D printer working on an assignment and then comparing it with all other assignments for that particular product.With major cyber attacks taking place in the recent history, the world now knows that nothing in this world is safe.

Whether it’s a smartphone, computer, smart TV, or even a Nuclear power plant, if it’s connected to the Internet, someone sitting hundreds of millions of miles away in some remote location can get access to them and put your life on a toss. 3D printing is gathering higher adoption in the manufacturing industry and manufacturers need to be sure that their printers are safe from hackers with malicious intentions of watching the world burn.Automobile Tubing Suppliers Researchers find gold nanoparticles to help detect tampering of 3D printed products by hackers. These gold nanoparticles will be embedded in the filament used to make the products.With these methods, it will be easier to ensure that products are delivered to the consumers without containing any irregularities embedded by some hacker guy in a hoodie.With inputs from Motherboard(source). 3D printing is gathering higher adoption in the manufacturing industry and manufacturers need to be sure that their printers are safe from hackers with malicious intentions of watching the world burn. Airbus builds some of the vital components for its aircraft models and if this were to happen on a passenger commercial flight, the results could have been tragic.

After the product is manufactured and delivered to the customer, it needs to be scanned to ensure that the nanoparticles are in the places they are supposed to be.The second method is almost similar to the first — only the physical movements of the printer are compared with every assignment. 3D printers have been the latest object of obsession for the hacker community and the world has a potential to be adversely affected by hacked 3D printed products.Last year, Researchers were able to hack into a 3D printer that was printing propellers for a drone. Luckily, this was an unmanned drone that caused no harm to anyone. The result was that the drone took flight with those flawed propellers and crashed within minutes of its flight. Researchers from the USENIX Security Symposium in Vancouver have uncovered three ways to secure 3D printers from the wrath of hackers. They accessed the blueprint of the propeller that the printer was using and embedded a minor flaw undetectable to the human eye. The third method is where they use gold nanoparticles to detect the irregularities

Apple is releasing iPhone 7 and iPhone 7 Plus (PRODUCT) RED Special Edition in 128GB and 256 GB models Red variants of Apple iPhone 7 and iPhone 7 Plus Apple had announced the launch of a Red colour variant of its latest flagship, iPhone 7 and iPhone 7 Plus, in its support to build an AIDS-free generation.The Cupertino-based hardware firm have been in partnership with RED for 10 years supporting HIV/AIDS programs that provide counselling, testing, and medicine to prevent transmission of HIV from mother to her unborn child.

In another effort to raise funds for the program, Apple is releasing iPhone 7 and iPhone 7 Plus (PRODUCT) RED Special Edition in 128GB and 256 GB models at 749 (approx. Rs 49,000) and 869 (approx. Rs 57,000) from Apple’s website and stores from Friday, March 24.“Since we began working with (RED) 10 years ago, our customers have made a significant impact in fighting the spread of AIDS through the purchase of our products, from the original iPod nano (PRODUCT)RED Special Edition all the way to today’s lineup of Beats products and accessories for iPhone, iPad and Apple Watch,” said Tim Cook, Apple’s CEO in a press release. “The introduction of this special edition iPhone in a gorgeous red finish is our biggest (PRODUCT)RED offering to date in celebration of our partnership with (RED), and we can’t wait to get it into customers’ hands,” he added.

Apart from this, other Apple products including Beat Solo3 Wireless On-Ear Headphones, full iPod line of products, Beats Pill+ Portable Speaker, the iPhone 7 Smart Battery Case, and a range of accessories for iPhone, iPad, and Apple Watch are all available in the (PRODUCT) RED range.“Apple is the world’s largest corporate donor to the Global Fund, contributing more than 130 million as part of its partnership with (RED),” said Deborah Dugan, China wholesale Rubber Products (RED)’s CEO.